Add and maintain fill material
Your list of fill material is on the “Packing standard” page. PackMate only plans what is in stock. From weight and amount per litre it calculates the fill for every order. The packing guide gives it in litres and, if you like, in sheets, handfuls or metres.
Steps
- 1. Open Packing standard and click “Add material”. To change one, click “Edit” on that material.
- 2. Enter name, type, weight, cost and material category (see Fields).
- 3. For padding, enter the padding thickness.
- 4. Under “Handy amount in the packing guide” choose a unit if you want to see “about 3 sheets” instead of litres only. Enter how much void one portion fills.
- 5. Save.
- 6. In the list, switch “In stock” on only for material you really have.
- 7. Choose one material as “Default”.
Fields
- Name — 100 characters at most.
- Type — void fill, padding or both.
- Weight — grams per litre. Must be greater than 0.
- Cost — per litre in your shop currency. From 0.
- Padding thickness — only for padding and both.
- Handy amount in the packing guide — Automatic (PackMate default), sheet, handful, metre from the roll, or “None — show litres only”. One portion can fill between 0.1 and 50 litres.
- Packaging material category — the category your weight is counted under in your packaging report.
- In stock — PackMate does not plan material that is not in stock.
- Default — the material PackMate fills gaps with. You cannot choose a padding-only material as default.
Questions
Which materials are already there?
Four: wrapping paper / crumpled paper (default), bubble wrap, polystyrene chips and foam insert. You cannot delete these four. If you do not use one, switch it off under “In stock”.
Where does “about 8 sheets” come from?
PackMate uses rules of thumb: 1 sheet of wrapping paper ≈ 1.5 litres, 1 handful of chips ≈ 0.5 litres, 1 metre of bubble wrap ≈ 3 litres. These are rough values for loosely laid material, not a measurement of your stock. Try it once and enter your own value. Your value always beats the default. For foam inserts and your own materials without a matching name or category PackMate shows litres until you choose a unit. At least one portion is shown as soon as anything is filled.
What happens if my default is out of stock?
PackMate then fills by your profile with whatever is in stock. If nothing is in stock, the page says so: “No fill material is in stock right now.”
What happens if I delete a material?
Products that use it fall back to the default. Templates that use it can only be applied again once you choose another material. PackMate tells you beforehand.
Does fill material count in my report?
Yes. The weight of the fill counts towards your packaging register report, split by category. PackMate’s German LUCID quantities count box and fill material for shipments to Germany. Tape and labels are not included, nor is the packaging of your products themselves.
Can I enter a mix?
Yes. A material can be a mix of categories. The shares must add up to 100 %.